A new software update is available for the StarSat SR-90000HD Extreme satellite receiver. The latest listed firmware is V378, dated 11 September 2026.
The V378 firmware file is approximately 35.8 MB and follows the previous V377 release from 31 August 2026. Users of the SR-90000HD Extreme should verify their exact receiver model before downloading or installing the update.
StarSat SR-90000HD Extreme V378 Software Details
| Brand | StarSat |
| Receiver Model | SR-90000HD Extreme |
| Software Version | V378 / 3.78 |
| Firmware File | SR-90000HD_EXTREME_V378_11092026.bin |
| Release / Listed Date | 11 September 2026 |
| File Size | Approximately 35.8 MB |
| File Type | BIN Firmware |
| Previous Version | V377 |
| Upgrade Method | Compatible Receiver Firmware Upgrade |
StarSat SR-90000HD Extreme V378 Latest Update
V378 is currently listed as a newer firmware release following V377. The previous V377 version was listed on 31 August 2026, while V378 is dated 11 September 2026.
A complete manufacturer-verified public changelog is not available from the listing used for this update. Therefore, users should not assume specific feature additions or bug fixes unless they are separately confirmed for the SR-90000HD Extreme.
SR-90000HD Extreme V378 Software Download
The latest firmware listing and download information can be accessed through the page below.
Download SR-90000HD Extreme V378
Version: V378 | Date: 11-09-2026 | Size: Approximately 35.8 MB
Important: Before downloading, verify that the page shows StarSat SR-90000HD Extreme and V378. Do not use firmware intended for another StarSat receiver.
How to Upgrade StarSat SR-90000HD Extreme Software
Follow the receiver's supported firmware update procedure. The general USB upgrade process is given below for reference.
- Verify the model: Confirm that your receiver is exactly StarSat SR-90000HD Extreme.
- Check the current software: Open the receiver information screen and note the current firmware version.
- Download V378: Download the firmware specifically listed for SR-90000HD Extreme.
- Prepare the USB drive: Use a compatible USB flash drive. FAT32 is commonly used by satellite receivers where supported.
- Copy the firmware file: If the download is compressed, extract it first and copy the required firmware file to the USB drive.
- Connect the USB drive: Insert it into the receiver's USB port.
- Open the upgrade menu: Navigate to the receiver's Software Upgrade, USB Upgrade or supported firmware update menu.
- Select V378: Select the correct V378 firmware file from the USB storage.
- Start the update: Confirm the upgrade and wait until the receiver completes the process.
- Do not interrupt power: Never switch off the receiver, disconnect its power supply or remove the USB drive while firmware is being written.
- Verify the update: After the receiver restarts, open the information screen and confirm the installed firmware version.
V378 vs Previous SR-90000HD Extreme Firmware
| Firmware Version | Listed Date | Approx. File Size |
|---|---|---|
| V378 | 11 September 2026 | 35.8 MB |
| V377 | 31 August 2026 | 35.8 MB |
| V376 | 27 August 2026 | 35.8 MB |
Before Installing V378 Firmware
Before upgrading, create a backup of your channel list and important receiver settings if your SR-90000HD Extreme provides a supported backup option.
Also make sure the receiver has a stable power supply during the firmware installation. Interrupting power while firmware is being written can prevent a receiver from starting correctly.
After Installing V378
Once the receiver has restarted, open the system information page and verify the software version. Check your satellite list, LNB configuration, channel database, video settings and network preferences because some settings may need to be restored after a firmware upgrade.
Frequently Asked Questions
What is the latest StarSat SR-90000HD Extreme software?
The latest September 2026 firmware currently listed for the SR-90000HD Extreme is V378, dated 11 September 2026.
What is the file size of SR-90000HD Extreme V378?
The V378 firmware file is listed at approximately 35.8 MB.
Is V378 newer than V377?
Yes. V377 was listed on 31 August 2026, while V378 is dated 11 September 2026.
Can I install V378 using a USB flash drive?
Use only an upgrade method supported by the SR-90000HD Extreme. Where USB firmware upgrading is supported, use the receiver's official Software Upgrade or USB Upgrade menu and the correct firmware file.
Can I install SR-90000HD Extreme firmware on another StarSat model?
No. Do not install firmware on a different receiver unless compatibility is explicitly confirmed. Receiver firmware can be specific to a particular model and hardware revision.
Should I factory reset the receiver after installing V378?
A factory reset should not be performed automatically unless the firmware instructions require it or the receiver develops configuration problems. Remember that a factory reset can erase channels and user settings.
Should I back up my channel list before upgrading?
Yes. If the receiver provides a supported backup feature, saving the channel list and important settings before the firmware update is recommended.
What should I do if my receiver is already working properly?
Check the available release information before updating. There is no need to install firmware simply because a higher version number exists unless the update is appropriate for your receiver and your requirements.
Why should power not be disconnected during the update?
Interrupting power while receiver firmware is being written can corrupt the installation and may prevent the receiver from booting correctly.
Final Words
The StarSat SR-90000HD Extreme V378 software update 2026 is a newer September firmware listing following V377. Users should verify the exact receiver model, firmware version and download file before starting the upgrade.
For more StarSat receiver software, latest firmware updates, satellite frequencies, receiver tutorials and dish setting guides, keep visiting Sat Guru.
No comments:
Post a Comment